• Aquapal
  • Karl Fischer Oven
  • Parts & Accessories
  • Reagents
  • Volumetric Titrator
  • Evaporators

KARL FISCHER TITRATION

Karl Fisher Titration is a technique for the determination of moisture content. The technique was developed by a chemist named Karl Fischer. It is based on a reagent which reacts with water and converts the water into a non-conductive chemical. Karl Fisher provides for the specific detection of water content in a product.

26100OCP Set Of Caps Only
Set Of Caps Only (3 Small, 1 Medium, 1 Large)
72.40 72.4 USD
26100OST Set Of O-rings
Set Of O-rings (3 Small, 1 Medium, 1 Large)
149.00 149.0 USD
Aquapal III Karl Fischer Moisture Analyzer (no Glassware)
Coulometric Titrator Standard Glassware Tests according to ASTM D4928, D1533, D1744 and equivalent methods. CE approved manufacturer.
Unit ready for operation. Includes:
- Built in printer with standard paper that backs up test with hard copy results.
- Verify test at any time with printout including mean, standard deviation and coefficient of variation.
- Speed is 2 mg/minute
- Test range from 1ppm to 100%
- Sensitive to 0.1 ug
- Calculations in Weight, volume or dilution
- Automatic Drift Correction
- Results printed in ppm, %, ug
- Standard RS232C output
- Small lab foot print 14" x 8"
- Portable (field Use)
5,107.00 5107.0 USD
Aquapal III Moisture Analyzer w/ Single-reagent Glassware
Coulometric Titrator Diaphragmless Glassware Tests according to ASTM D4928, D1533, D1744 and equivalent methods. CE approved manufacturer.
Unit ready for operation. Includes:
- Built in printer with standard paper that backs up test with hard copy results.
- Speed is 2 mg/minute
- Test range from 1ppm to 100%
- Sensitive to 0.1 ug
- Calculations in Weight, volume or dilution
- Automatic Drift Correction
- Results printed in ppm ,% , ug
- Standard RS232C output
- Small lab foot print 14" x 8"
- Portable (field Use)
- Easy to use for non-technical operators
- Simple keypad format with limited menus. Enter the weight or Specific gravity number, Press <ENTER>, Introduce sample, and press <START>. When the test finishes data showing the results will print out automatically.
8,493.00 8493.0 USD
Aquapal III Moisture Analyzer w/ Standard Glassware
Coulometric Titrator Standard Glassware Tests according to ASTM D4928, D1533, D1744, and equivalent methods. CE approved manufacturer.

Unit ready for operation includes:

- Built-in printer with standard paper that backs up a test with hard copy results.
- Verify test at any time with printout including mean, standard deviation and coefficient of variation.
- Speed is 2 mg/minute
- Test range from 1ppm to 100%
- Sensitive to 0.1ug
- Calculations in weight, volume or dilution
- Automatic Drift Correction
- Results printed in ppm, %, ug
- Standard RS232C output
- Small lab foot print 14" x 8"
- Portable (field use)
8,493.00 8493.0 USD
690.00 690.0 USD
656.00 656.0 USD
Disposable Needle, 4inch
Air-Tite Premium Hypodermic Needles for laboratory use, 16 gauge surgical stainless steel tubing, 4 inch length. Packaged in individual sterile strip packs. ISO 9001 certified. Pk/100
187.00 187.0 USD
Drying Tube & Cap
Drying tube
127.00 127.0 USD
Dual - Reagent Glassware and Accessories
Complete set of glassware for Aquapal (fritted generator electrode)
3,681.00 3681.0 USD
Gas Inlet Tube, For 26100ves
Gas Inlet Tube, For 26100ves
138.00 138.0 USD
Gas Outlet Tube, For 26100ves
Gas Outlet Tube, For 26100ves
317.00 317.0 USD
Gastight Syringe, 1ml
Gastight Syringe, 1ml
184.00 184.0 USD
Gastight Syringe, 2.5ml
Gastight Syringe, 2.5ml
239.00 239.0 USD
Generator Electrode, Single-reagent System
Generator electrode - Fritless
2,261.00 2261.0 USD
Generator Electrode, Standard Reagent System
Generator electrode - Standard
2,261.00 2261.0 USD
Hamilton Digital Syringe
Hamilton Digital Syringe
0.00 0.0 USD
Hydranal Coulomat A, 500ml
Anolyte standard two component coulometry. Hydranal anolytes contain iodide and a sulphur dioxide/imidazole buffer in a suitable solvent. Coulomat A contains methanol and chloroform as the solvents. Water capacity is > 10mg/ml.
Shelf life is 5 years, as long as the bottle remains unopened.
197.00 197.0 USD
Hydranal Coulomat A, 500ml x6
Anolyte standard two component coulometry. Hydranal anolytes contain iodide and a sulphur dioxide/imidazole buffer in a suitable solvent. Coulomat A contains methanol and chloroform as the solvents. Water capacity is > 10mg/ml.
Shelf life is 5 years, as long as the bottle remains unopened.
1,010.00 1010.0 USD