ADP-512 High Heat Evaporator for Ores for Karl Fischer

[Features]
1) Measurement for micro amount of water is least affected from ambient moisture because the movement of
sample boat is controlled by magnet, operated outside the sealed heating unit, and thus accurate and reliable
results are assured.
2) The newly designed electric furnace operates in a wide range of degrees from room temperature up to 1000°C,
featuring relatively short warm-up time, taking approximately 30 minutes for temperature rise as well as for
equilibrium respectively.
3) PID control by the built-in thermostat provides an accurate and stable oven temperature.
4) The safety while working on the electric oven is secured because the maximum temperature over the oven
surface is always kept under 70°C.
5) The built-in excessive heat prevention unit is another safety measures with a thermometer in it, which is
separate from the sensor for temperature control.
6) This evaporator is equipped with two types of electric furnace (for low temperature and for high temperature),
which enables measurement for hygroscopic water as well as combined water without taking the sample out
of the oven.

ADP-513 Karl Fischer Oil Evaporator

FEATURES:
-Digital temperature control
-Rotameter carrier gas flow control
-Built-in carrier gas drying system Operating temperature ambient up to 200°C Heated transfer tube
-Overheating protection
-Automatic cell evacuation system

SPECIFICATIONS:
Temperature Range: Room - 200°C
Heating method: Cartridge base heater
Ambient conditions: 5 - 35°C, less than 85% RH
Power: AC100～120/200~240V±10％）(Specify required voltage)
Power Consumption: 400W
Dimensions: 320 x 210 x 330 mm
Weight: Approx. 6 kg

MCU-610 Touch Panel Controller for Titrator

AM-101

Standard Glassware, Complete Set And Accessories includes:
-26100SIV: Aquapal Molecular Sieve (bottle)
-26100VES: Titration Vessel with caps and seals
-26100DEL: Detector Electrode
-26100GEL: Generator Electrode (with Frit)
-26100ODT: Drying Tube with cap
-26100BAR: Stirrer Bar
-26100NEE: Needle / 4 inch
-26102SYP: 5 each disposable syringes
-26100SEP: Pack of 50 each Injection Septa
-26100FUN: Funnel

Single Glassware Setup, Complete Set And Accessories includes: 26100SIV: Aquapal Molecular Sieve (bottle) 26100VES: Titration Vessel with caps and seals 26100DEL: Detector Electrode 26100GEL: Generator Electrode (without Frit) 26100ODT: Drying Tube with cap 26100BAR: Stirrer Bar 26100NEE: Needle / 4 in 26102SYP: 5 each disposable syringes 26100SEP: Pack of 50each Injection Septas 26100FUN: Funnel

K433-3389: Liquefied gas sampler/MKC, MKA

Parts Included:
(1) Connecting pipe12-05241
(2) Needle 66-00196
(3) Sampling cock 12-05144
(4) Exhaust tube 􏰓 Desiccator 12-04306 (not for MKC)
(5) Bubbler 20-09225
(6) Bubbler adapter 20-09226 (not for MKA)
(7) Stopper with septum 98-433-0062
(8) PTFE Packing 20-05723
(9) Stand, Clamp, Clamp holder 98-433-0063
(10) Desiccant Container 12-05333 (not for MKA)
(11) Silicone grease 12-04181
(12) Liquefied gas sampler Operation Manual 59-00427

1Component Type Titration Cell Unit with Funnel

K120735501(12-006-6100-48) (K433-0005): Karl Fisher Cell Unit; For two solution system; Includes Titration cell, Inner burette (2-solution), Twin Platinum detector electrode, Port Plugs, Stir Bar, Pack of septa, and Desiccant Tube A.

Titration cell unit complete with 1component inner burette, detector electrode, port plug, and stir bar

K433-3014: Liquefied gas sampler/MKA

ADP-344; Heat Extractor for Sugar Samples

K433-0085: Homogenizer attachment

A&D HR-250A Analytical Balance:
-Capacity: 252g
-Readability: 0.1mg
-Minimum weight: 140mg
-Linearity: +-0.3mg
-Stabilization time: Approx. 2 seconds
-Internal calibration: YES
-Display type: Reverse backlit LCD
-Interface: RS232
-External dimension: 198(W) x 294 (D) x 315 (H) mm
-Net weight: Approx. 3.9kg
-Power Supply: AC adapter

- Compact Super Hybrid Sensor (C-SHS) technology - enables you to perform high-speed, frustration-free weighing even at a readability of 0.1 mg.
- Built-in calibration mass - lets you ensure the accuracy of your balance with just one key press.
- Compact footprint: 198 mm × 294 mm - With the C-SHS, the footprint of the balance is smaller than the ISO A4 (210 mm × 297 mm) paper size, maximizing opportunities for the use of an analytical balance in even the smallest of spaces.
- Rotary sliding doors - Unlike conventional analytical balances, the HR-AZ/HR-A series requires no extra space at the rear for accessing the weighing chamber, as the doors simply rotate behind the balance.
- Removable breeze break - The breeze break is easily removed using a unique clip system, allowing fast, simple cleaning and use in confined spaces like gloveboxes and controlled environment cabinets.
- Lean design for affordability - The HR-AZ/HR-A design is all about “keeping it simple” without compromising quality or performance. This is a compact, precise, and reliable analytical balance for the value-conscious user.
- GLP/GMP/GCP/ISO compliant output - For compliance and documentation requirements, the HR-AZ/HR-A series can output the balance manufacturer, model, serial number, ID number, date and time*1, space for signature, and calibration records.
- User access control (UAC) with password function - The balance can be password-protected to allow only authorized individuals to use it or change its settings. It is also possible to disable any change to the balance settings including calibration or, for HR-AZ models, correction of the internal mass value.
- Adjustable response characteristics and hold function - From three preset combinations of weighing speed and stability (FAST, MID, or SLOW), select the one that best suits your environmental conditions (drafts and vibrations). A hold function is also available for weighing animals.
- Statistical calculation function - The balance displays and outputs statistical calculation data including number of data, sum, maximum, minimum, range (maximum–minimum), average, standard deviation, and coefficient of variation.

Primary Burette Drive for AT/MKV-710 series. Drive Only. (EBU-710-XXB Burette Unit (XXmL) not included.

K433-0087: Heater tube

A&D HR-200-C Analytical Balance The HR-200-C offers ten units of measure including grams, carats, troy ounces, pennyweight and momme; and provides capacity of up to 210 grams (1050 ct). Features: -Large weighing chamber holds up to a 250mm volumetric flask wide angle LCD Display -Good Laboratory Practices (GLP) software -Multi-functional weighing: %,counting,grams,mg. oz ozt,dwt,ct,mom,GN,t,TL -Clearly marked operating keys, full range tare -Range Key: suppresses least significant digit for faster speed & better stability when required -Counting function -Push button calibration -Front key selectable weighing filters -Outputs serial number of the balance -System diagnosis: IDs overload, weighing pan error, power failure, digital tare error, calibration errors & low battery -Body & frame constructed of exta strong die-cast aluminum alloy -RS-232C standard -Optional Battery pack -Last digit suppression -One touch printing -GLP/LIMS/ISO compliant Specifications: -CAPACITY: 210g -READABILITY: 0.1mg -PAN SIZE: 85mm /3.3" dia. -PERCENTAGE MIN DIV: 0.01%, 0.1% or 1% (auto prompt) -COUNTING MIN WEIGHT: 0.1mg -STABILIZATION TIME: 3 seconds -SENSITIVITY DRIFT:+-2ppm/degreeC -DISPLAY REFRESH: 5 times per second/10 times per second -DIMINENSIONS: 8.4x12.6x11.9" -WEIGHT: 12.5lbs

K433-0086: Titration unit / homogenizer

K433-0104: Oven