ADP-512 High Heat Evaporator for Ores for Karl Fischer

[Features]
1) Measurement for micro amount of water is least affected from ambient moisture because the movement of
sample boat is controlled by magnet, operated outside the sealed heating unit, and thus accurate and reliable
results are assured.
2) The newly designed electric furnace operates in a wide range of degrees from room temperature up to 1000°C,
featuring relatively short warm-up time, taking approximately 30 minutes for temperature rise as well as for
equilibrium respectively.
3) PID control by the built-in thermostat provides an accurate and stable oven temperature.
4) The safety while working on the electric oven is secured because the maximum temperature over the oven
surface is always kept under 70°C.
5) The built-in excessive heat prevention unit is another safety measures with a thermometer in it, which is
separate from the sensor for temperature control.
6) This evaporator is equipped with two types of electric furnace (for low temperature and for high temperature),
which enables measurement for hygroscopic water as well as combined water without taking the sample out
of the oven.

ADP-513 Karl Fischer Oil Evaporator

FEATURES:
-Digital temperature control
-Rotameter carrier gas flow control
-Built-in carrier gas drying system Operating temperature ambient up to 200°C Heated transfer tube
-Overheating protection
-Automatic cell evacuation system

SPECIFICATIONS:
Temperature Range: Room - 200°C
Heating method: Cartridge base heater
Ambient conditions: 5 - 35°C, less than 85% RH
Power: AC100～120/200~240V±10％）(Specify required voltage)
Power Consumption: 400W
Dimensions: 320 x 210 x 330 mm
Weight: Approx. 6 kg

MCU-610 Touch Panel Controller for Titrator

AM-101

K433-3389: Liquefied gas sampler/MKC, MKA

Parts Included:
(1) Connecting pipe12-05241
(2) Needle 66-00196
(3) Sampling cock 12-05144
(4) Exhaust tube 􏰓 Desiccator 12-04306 (not for MKC)
(5) Bubbler 20-09225
(6) Bubbler adapter 20-09226 (not for MKA)
(7) Stopper with septum 98-433-0062
(8) PTFE Packing 20-05723
(9) Stand, Clamp, Clamp holder 98-433-0063
(10) Desiccant Container 12-05333 (not for MKA)
(11) Silicone grease 12-04181
(12) Liquefied gas sampler Operation Manual 59-00427

1Component Type Titration Cell Unit with Funnel

K120735501(12-006-6100-48) (K433-0005): Karl Fisher Cell Unit; For two solution system; Includes Titration cell, Inner burette (2-solution), Twin Platinum detector electrode, Port Plugs, Stir Bar, Pack of septa, and Desiccant Tube A.

Titration cell unit complete with 1component inner burette, detector electrode, port plug, and stir bar

K433-3014: Liquefied gas sampler/MKA

ADP-344; Heat Extractor for Sugar Samples

K433-0085: Homogenizer attachment

K433-0087: Heater tube

K433-0086: Titration unit / homogenizer

K433-0104: Oven

K433-0068: Magnetic stirrer with dispenser

K1207105 (1205195/1201262/984330006): Inner Burette (2-component) for KEM Karl Fisher titrators; MKC500, 600 and 700 series.

K1205194 (K1203746/K103-0002): Inner Burette (Diaphragmless, 1-component )

AIN-410

K433-0047: Stirrer unit EP