KTC-B: Low Heat Flow/Embedding Type

KTC-C: Low Heat Flow/Embedding Type

HFM-215 Multi-Channel Heat Flow Meter

-Connectable with all heat flow sensors
-3.5 inch color TFT LCD
-High capacity external memory: Internal memory (16MB) can store data of 55 hours when eight sensors of sensor constant A/B type are connected and sampling rate is set at one second. External memory media, compact flash or SD card (1 to 2 GB), enable continuous measurement.
-Equipped with Ethernet: Ethernet (10BASE-T/100BASE-TX) enables data collection through network
-Data communication: Equipped with e-mail transmitting, Web server, FTP server and FTP client functions. RS-485, RS-232C and USB communication devices can also be used.
-Dual power source: Both rechargeable battery and AC adapter can be used, making the HFM-215N compact and easy to carry. Batter life for continuous use is seven hours (may vary depending on conditions).
-Enhanced safety: Equipped with shock-resistant rubber cushions.

KTV-B: For Water Cooled Surface Heavy Duty

KTV-C: For Water Cooled Surface Heavy Duty

KEV-(L): For Water Cooled Surface Heavy Duty

Model V-630 UV-VIS Spectrophotometer (PC)

KTF-T-B: High Heat Flow/Embedding Heavy Duty

KTF-T-C: High Heat Flow/Embedding Heavy Duty

KEC-(L): Low Heat Flow/Embedding Type

KEF-S-(L): High Heat Flow/Embedding Heavy Duty

KTT-B: High Heat Flow/Surface Heavy Duty

KTT-C: High Heat Flow/Surface Heavy Duty

SOFT-QTM5EW

PD-31N High-temperature probe for QTM 700 series

Thermal conductivity is measured by "sandwiching" the sample material between the heater and the temperature sensor. The PD-31N is a conventional type of sensor but with additional capabilities to allow the measurement of thermal conductivity with higher temperature ranges.
-New Materials
-Firebrick
-Heat insulation materials

-Optional high-temperature probe; #K1206479 / PD-31N High-temperature probe
>Measurement range: 0.06 ~ 5W/(m K)
>Dimensions: 110(w) x 50(d) x 100 (h) mm
>Measurment tempeature: -100 ~ 1,000 degree C
>Measuremnt time: 60 seconds
>Sample size: 100x50x20 mm or more 2 pieces

KER3-(L): Low Heat Flow/Surface 250x250x3

KET-(L): High Heat Flow/Surface Heavy Duty

PD-13N insulated moisture-proof probe

PD-13N is a version of the PD-11N with an added insulation film. Thermal conductivity using the PD-13N probe is ideal for aqueous materials and conductive materials.
-Food
-Concrete Paste
-Metal

Optional insulated moisture-proof probe; #K120647701 / PD-13N Insulated moisture-proof probe
>Measurement range: 0.03 ~ 12W/(m K)
>Dimensions: 110(w) x 50(d) x 100 (h) mm
>Measurment tempeature: 5 ~ 35 degree C
>Measuremnt time: 60 seconds
>Sample size: 100x50x20 mm or more

PD-11N: Standard Box Probe for QTM-700 series

Various measurements of sample types including blocks, powders and sheet material are possible with the PD-11N probe.
-Heat Insulation
-Ceramics
-Rubber
-Plastic
-Glass

Suggested standard probe; #K1206477/ PD-11N Box Type Probe
>Measurement range: 0.03 ~ 12W/(m K)
>Dimensions: 110(w) x 50(d) x 100 (h) mm
>Measurment tempeature: 5 ~ 35 degree C
>Measuremnt time: 60 seconds
>Sample size: 100x50x20 mm or more

KTG-B: Low Heat Flow/Embedding Type