For up to 8 full-height 200mm (8-inch) diameter sieves. Quick-release clamping system. Sieves sold separately.
230 V, 50 Hz

For up to 8 full-height 200mm (8-inch) diameter sieves. Quick-release clamping system. Sieves, lid and receiver pan not included.
[DROP SHIPMENT]

PD-13N insulated moisture-proof probe

PD-13N is a version of the PD-11N with an added insulation film. Thermal conductivity using the PD-13N probe is ideal for aqueous materials and conductive materials.
-Food
-Concrete Paste
-Metal

Optional insulated moisture-proof probe; #K120647701 / PD-13N Insulated moisture-proof probe
>Measurement range: 0.03 ~ 12W/(m K)
>Dimensions: 110(w) x 50(d) x 100 (h) mm
>Measurment tempeature: 5 ~ 35 degree C
>Measuremnt time: 60 seconds
>Sample size: 100x50x20 mm or more

PD-11N: Standard Box Probe for QTM-700 series

Various measurements of sample types including blocks, powders and sheet material are possible with the PD-11N probe.
-Heat Insulation
-Ceramics
-Rubber
-Plastic
-Glass

Suggested standard probe; #K1206477/ PD-11N Box Type Probe
>Measurement range: 0.03 ~ 12W/(m K)
>Dimensions: 110(w) x 50(d) x 100 (h) mm
>Measurment tempeature: 5 ~ 35 degree C
>Measuremnt time: 60 seconds
>Sample size: 100x50x20 mm or more

K12-02854 (old part no. K020-0006:2-system Pump A (for shower & rinse). Stronger shower rinse for non-aqueous samples.

Manufacturer: Schaller Messtechnik. Complete test kit for water activity test. A proven system for accurate aW results. Most results in five minutes.
Includes the following items:
. Measuring Chamber
. Water Activity Meter
. Connecting Cable (2 meters)
. Special Accuracy Enhancements
+ Thermal Barrier
+ Sample Grinder
. 10 ASTM Certified Calibration Standards (5 aw0.500 & 5 aw0.800)
. Two 125ml Test Sample Jars
. Storage/Carry Case

K1207356 (K12-006-6300-48); Titration Cell Unit, 2 solution with drain valve. The Cell Unit includes all of the necessary "glassware" items including: -Titration Cell with drain valve; -Inner buret (2 solution); K433-0006 -Detector electrode; K103-M713 -Port plug 19/25; K550-0073 -Desiccant tube; K433-3116 -Stirrer bar; K500-3362S

K433-3389: Liquefied gas sampler/MKC, MKA

Parts Included:
(1) Connecting pipe12-05241
(2) Needle 66-00196
(3) Sampling cock 12-05144
(4) Exhaust tube 􏰓 Desiccator 12-04306 (not for MKC)
(5) Bubbler 20-09225
(6) Bubbler adapter 20-09226 (not for MKA)
(7) Stopper with septum 98-433-0062
(8) PTFE Packing 20-05723
(9) Stand, Clamp, Clamp holder 98-433-0063
(10) Desiccant Container 12-05333 (not for MKA)
(11) Silicone grease 12-04181
(12) Liquefied gas sampler Operation Manual 59-00427

K433-3014: Liquefied gas sampler/MKA

ADP-344; Heat Extractor for Sugar Samples

MEASURING METHOD: Resonant frequency oscillation
WHAT TO MEASURE: Liquid samples
MEASURING RANGE: 0.0000 to 2.0000g/cm3
ACCURACY: ±0.001g/cm3
RESOLUTION: 0.0001g/cm3
TEMPERATURE RANGE: 0 to 40.0° C (32 to 104° F)
BACKLIT DISPLAY: Density, temp-compensated density, SG, temp-compensated SG, Brix%, Alcohol wt%, Alcohol vol%, %H2SO4, API degree, Baume degree, Plato degree, Proof degree, Temperature in °C/°F, Sample No., Stability, Data storage, Data output, Data deletion, Battery level, etc.
TEMPERATURE COMPENSATION: Up to 10 coefficients for temperature compensation can be entered.
MATERIALS IN CONTACT WITH SAMPLE: PTEE, borosilicate glass, polypropylene (PP), Fluoro Rubber *May not be resistant to every sample and cleaning solution.
AUTO-CALIBRATION: Density of water at each temperature, required for calibration of measuring cell, is pre-installed.
SAMPLING BY: Syringe-type hand pump
DATA STORAGE: Up to 1,100 samples
EXTERNAL OUTPUT: Infrared communications port (conforming to IrDA Ver. 1.2) Conversion to RS-232C output (Optional parts required)
POWER SUPPLY: Alkaline battery LR03 (AAA) 1.5V 2pcs
BATTERY LIFE: Approx. 90 hours
WEIGHT: Approx. 360g (0.794 lbs)

ASU-100D Sampling Unit for DCM-101

A&D HR-250A Analytical Balance:
-Capacity: 252g
-Readability: 0.1mg
-Minimum weight: 140mg
-Linearity: +-0.3mg
-Stabilization time: Approx. 2 seconds
-Internal calibration: YES
-Display type: Reverse backlit LCD
-Interface: RS232
-External dimension: 198(W) x 294 (D) x 315 (H) mm
-Net weight: Approx. 3.9kg
-Power Supply: AC adapter

- Compact Super Hybrid Sensor (C-SHS) technology - enables you to perform high-speed, frustration-free weighing even at a readability of 0.1 mg.
- Built-in calibration mass - lets you ensure the accuracy of your balance with just one key press.
- Compact footprint: 198 mm × 294 mm - With the C-SHS, the footprint of the balance is smaller than the ISO A4 (210 mm × 297 mm) paper size, maximizing opportunities for the use of an analytical balance in even the smallest of spaces.
- Rotary sliding doors - Unlike conventional analytical balances, the HR-AZ/HR-A series requires no extra space at the rear for accessing the weighing chamber, as the doors simply rotate behind the balance.
- Removable breeze break - The breeze break is easily removed using a unique clip system, allowing fast, simple cleaning and use in confined spaces like gloveboxes and controlled environment cabinets.
- Lean design for affordability - The HR-AZ/HR-A design is all about “keeping it simple” without compromising quality or performance. This is a compact, precise, and reliable analytical balance for the value-conscious user.
- GLP/GMP/GCP/ISO compliant output - For compliance and documentation requirements, the HR-AZ/HR-A series can output the balance manufacturer, model, serial number, ID number, date and time*1, space for signature, and calibration records.
- User access control (UAC) with password function - The balance can be password-protected to allow only authorized individuals to use it or change its settings. It is also possible to disable any change to the balance settings including calibration or, for HR-AZ models, correction of the internal mass value.
- Adjustable response characteristics and hold function - From three preset combinations of weighing speed and stability (FAST, MID, or SLOW), select the one that best suits your environmental conditions (drafts and vibrations). A hold function is also available for weighing animals.
- Statistical calculation function - The balance displays and outputs statistical calculation data including number of data, sum, maximum, minimum, range (maximum–minimum), average, standard deviation, and coefficient of variation.

SA 210IW Analytical Balance

KEM DA-130N Portable Density Meter/Specific Gravity Meter
-MEASURING METHOD: Resonant frequency oscillation
-MEASURING RANGE: 0.0000 to 2.0000g/cm3
-ACCURACY: ±0.001g/cm3
-RESOLUTION: 0.0001g/cm3
-TEMPERATURE RANGE: 0 to 40.0° C (32 to 104° F)
-BACKLIT DISPLAY: Density, temp-compensated density, SG, temp-compensated SG, Brix%, Alcohol wt%, Alcohol vol%, %H2SO4, API degree,
Baume degree, Plato degree, Proof degree, Temperature in ° C/° F, Sample No.,
-TEMPERATURE COMPENSATION: Yes
-AUTO-CALIBRATION: Yes
-SAMPLING BY: Syringe-type hand pump
-DATA STORAGE: Up to 1,100 samples
-POWER SUPPLY: Alkaline battery LR03 (AAA) 1.5V 2pcs
-BATTERY LIFE: Approx. 90 hours
-WEIGHT: Approx.(0.794 lbs)

K12-01824:K12-01824; Sampling Unit (Peristaltic Pump Suction Type)

A&D HR-250A Analytical Balance:
-Capacity: 252g
-Readability: 0.1mg
-Minimum weight: 140mg
-Linearity: +-0.3mg
-Stabilization time: Approx. 2 seconds
-Internal calibration: No
-Display type: Reverse backlit LCD
-Interface: RS232
-External dimension: 198(W) x 294 (D) x 315 (H) mm
-Net weight: Approx. 3.5kg
-Power Supply: AC adapter

- Compact Super Hybrid Sensor (C-SHS) technology - enables you to perform high-speed, frustration-free weighing even at a readability of 0.1 mg.
- Built-in calibration mass - lets you ensure the accuracy of your balance with just one key press.
- Compact footprint: 198 mm × 294 mm - With the C-SHS, the footprint of the balance is smaller than the ISO A4 (210 mm × 297 mm) paper size, maximizing opportunities for the use of an analytical balance in even the smallest of spaces.
- Rotary sliding doors - Unlike conventional analytical balances, the HR-AZ/HR-A series requires no extra space at the rear for accessing the weighing chamber, as the doors simply rotate behind the balance.
- Removable breeze break - The breeze break is easily removed using a unique clip system, allowing fast, simple cleaning and use in confined spaces like gloveboxes and controlled environment cabinets.
- Lean design for affordability - The HR-AZ/HR-A design is all about “keeping it simple” without compromising quality or performance. This is a compact, precise, and reliable analytical balance for the value-conscious user.
- GLP/GMP/GCP/ISO compliant output - For compliance and documentation requirements, the HR-AZ/HR-A series can output the balance manufacturer, model, serial number, ID number, date and time*1, space for signature, and calibration records.
- User access control (UAC) with password function - The balance can be password-protected to allow only authorized individuals to use it or change its settings. It is also possible to disable any change to the balance settings including calibration or, for HR-AZ models, correction of the internal mass value.
- Adjustable response characteristics and hold function - From three preset combinations of weighing speed and stability (FAST, MID, or SLOW), select the one that best suits your environmental conditions (drafts and vibrations). A hold function is also available for weighing animals.
- Statistical calculation function - The balance displays and outputs statistical calculation data including number of data, sum, maximum, minimum, range (maximum–minimum), average, standard deviation, and coefficient of variation.

Aluminum Spheres, ∅1.5mm (10,000pcs/set). Use with sample container ∅13mm. Use with low viscosity applications; $0.20 each

K120426701; This automatic shower is an additional accessory that can be used to improve the traditional dip rinse used to clean the electrode between samples. This shower is for aqueous samples only. There is an additional shower configuration for non-aqueous samples.

Electrode Auto-Cleaning Bath Assy. for 11-place unit
consists of:
1 ea Cleaning Bath with tubing and clamp
1 ea Pump Unit
1 ea Cleaning Solution Tube
1 ea TPO tube + PTFE tube 1.5m
1 ea Overflow tube
1 ea 12-04408 10L Polyethylene Container
4 ea Hose Clamp
1 ea Clip

K1204267: This automatic shower is an additional accessory that can be used to improve the traditional dip rinse used to clean the electrode between samples. This shower is for aqueous samples only. There is an additional shower configuration for non-aqueous samples.

Electrode Auto-Cleaning Bath Assy. for 6-place unit
consists of:
1 ea Cleaning Bath with tubing and clamp
1 ea Pump Unit
1 ea Cleaning Solution Tube
1 ea TPO tube + PTFE tube 1.5m
1 ea Overflow tube
1 ea 12-04408 10L Polyethylene Container
4 ea Hose Clamp
1 ea Clip