Automatic Titration

K434-0175: pH Temperature Compensation Card

ZSA 80 Analytical Balance

4 place analytical balance
-Capacity/Range: 80grams
-Readability: 0.0001 grams
-Repeatability (std dev): 0.00015 grams
-Linearity: +-0.0002 grams
-Stabilization Time: avg 3 seconds
-Pan Size: Circular 3.5 diameter (inches)
-Windscreening: 7.5W x 8.25D x 9.5H (inches)
-Balance Housing: 7.5W x 11.25D x 3.25H (inches)
-Manufactured in the United States

ZSA 210 Analytical Balance

4 place analytical balance
-Capacity/Range: 210grams (x 0.1mg)
-Readability: 0.0001 grams
-Repeatability (std dev): 0.00015 grams
-Linearity: +-0.0002 grams
-Stabilization Time: avg 3 seconds
-Pan Size: Circular 3.5 diameter (inches)
-Windscreening: 7.5W x 8.25D x 9.5H (inches)
-Balance Housing: 7.5W x 11.25D x 3.25H (inches)
-Manufactured in the United States

K380-048: Turntable for 12 samples

K550-6564S: Tube Nozzle A-2 (Sample inlet/outlet) 2pcs/set

K660-048: Titrant temperature compensation sensor

K12-03966 (K100-T111): Temperature compensation electrode(standard)

K120012700 (K100-T171): Temperature compensation electrode

K100-T111L:Temperature Compensation Electrode (cable 200mm)

SCU-118; For automatic titrators (AT-500 through AT-710 series) working with:
-Highly volatile samples
-Oxygen sensitive and cannot be exposed to the atmosphere
-Nitrogen purging is possible inside of the assembly

K020-0029:Sample drain unit 2

K434-6655: K434-6655; Sample Inlet for Handheld Density Meter DA-110

K660000901: Sample Changer Disposable 200mL Cups (1000 pcs/set)

SA 210IW Analytical Balance

CBM-910II-40RF120 Palm-Sized Dot-Impact Printer

KCHG-310-12: KEM Sample Changer, 12 Samples

K12-001-6500-48:Electrode Holder (multi for CHA600 Sample Changer)

K1204267: This automatic shower is an additional accessory that can be used to improve the traditional dip rinse used to clean the electrode between samples. This shower is for aqueous samples only. There is an additional shower configuration for non-aqueous samples.

Electrode Auto-Cleaning Bath Assy. for 6-place unit
consists of:
1 ea Cleaning Bath with tubing and clamp
1 ea Pump Unit
1 ea Cleaning Solution Tube
1 ea TPO tube + PTFE tube 1.5m
1 ea Overflow tube
1 ea 12-04408 10L Polyethylene Container
4 ea Hose Clamp
1 ea Clip

K120426701; This automatic shower is an additional accessory that can be used to improve the traditional dip rinse used to clean the electrode between samples. This shower is for aqueous samples only. There is an additional shower configuration for non-aqueous samples.

Electrode Auto-Cleaning Bath Assy. for 11-place unit
consists of:
1 ea Cleaning Bath with tubing and clamp
1 ea Pump Unit
1 ea Cleaning Solution Tube
1 ea TPO tube + PTFE tube 1.5m
1 ea Overflow tube
1 ea 12-04408 10L Polyethylene Container
4 ea Hose Clamp
1 ea Clip