Parts & Accessories

K740-3031: High viscous sampler

ADP-344; Heat Extractor for Sugar Samples

ADP-512 High Heat Evaporator for Ores for Karl Fischer

[Features]
1) Measurement for micro amount of water is least affected from ambient moisture because the movement of
sample boat is controlled by magnet, operated outside the sealed heating unit, and thus accurate and reliable
results are assured.
2) The newly designed electric furnace operates in a wide range of degrees from room temperature up to 1000°C,
featuring relatively short warm-up time, taking approximately 30 minutes for temperature rise as well as for
equilibrium respectively.
3) PID control by the built-in thermostat provides an accurate and stable oven temperature.
4) The safety while working on the electric oven is secured because the maximum temperature over the oven
surface is always kept under 70°C.
5) The built-in excessive heat prevention unit is another safety measures with a thermometer in it, which is
separate from the sensor for temperature control.
6) This evaporator is equipped with two types of electric furnace (for low temperature and for high temperature),
which enables measurement for hygroscopic water as well as combined water without taking the sample out
of the oven.

K740-3024: Eggplant-type sampler

K090-148:Disposable cap (1000pcs/set)

(26102SYP 5mL)Disposable Syringe / 5mL Plastic (Latex free) (syringe only - requires the disposable needle sold separatelty)

(26102SYP) Disposable Syringe / 3mL Plastic (Latex free) (syringe only - requires the disposable needle sold separatelty)

Disposable Needle; 16guage by 4inches long (does not include the disposable syringe Part No. 26102SYP)

K740-3020: C type sampler (for powder)

K10B-A21:Balance Interface For Mka210 For Satorius As-210s

K12-001-9400-48 (K439-5263):BJP20 tube (L=1100); Extra long delivery tube recommended for ease of reaching the sample changer

A&D HR-250A Analytical Balance:
-Capacity: 252g
-Readability: 0.1mg
-Minimum weight: 140mg
-Linearity: +-0.3mg
-Stabilization time: Approx. 2 seconds
-Internal calibration: No
-Display type: Reverse backlit LCD
-Interface: RS232
-External dimension: 198(W) x 294 (D) x 315 (H) mm
-Net weight: Approx. 3.5kg
-Power Supply: AC adapter

- Compact Super Hybrid Sensor (C-SHS) technology - enables you to perform high-speed, frustration-free weighing even at a readability of 0.1 mg.
- Built-in calibration mass - lets you ensure the accuracy of your balance with just one key press.
- Compact footprint: 198 mm × 294 mm - With the C-SHS, the footprint of the balance is smaller than the ISO A4 (210 mm × 297 mm) paper size, maximizing opportunities for the use of an analytical balance in even the smallest of spaces.
- Rotary sliding doors - Unlike conventional analytical balances, the HR-AZ/HR-A series requires no extra space at the rear for accessing the weighing chamber, as the doors simply rotate behind the balance.
- Removable breeze break - The breeze break is easily removed using a unique clip system, allowing fast, simple cleaning and use in confined spaces like gloveboxes and controlled environment cabinets.
- Lean design for affordability - The HR-AZ/HR-A design is all about “keeping it simple” without compromising quality or performance. This is a compact, precise, and reliable analytical balance for the value-conscious user.
- GLP/GMP/GCP/ISO compliant output - For compliance and documentation requirements, the HR-AZ/HR-A series can output the balance manufacturer, model, serial number, ID number, date and time*1, space for signature, and calibration records.
- User access control (UAC) with password function - The balance can be password-protected to allow only authorized individuals to use it or change its settings. It is also possible to disable any change to the balance settings including calibration or, for HR-AZ models, correction of the internal mass value.
- Adjustable response characteristics and hold function - From three preset combinations of weighing speed and stability (FAST, MID, or SLOW), select the one that best suits your environmental conditions (drafts and vibrations). A hold function is also available for weighing animals.
- Statistical calculation function - The balance displays and outputs statistical calculation data including number of data, sum, maximum, minimum, range (maximum–minimum), average, standard deviation, and coefficient of variation.

A&D HR-250A Analytical Balance:
-Capacity: 252g
-Readability: 0.1mg
-Minimum weight: 140mg
-Linearity: +-0.3mg
-Stabilization time: Approx. 2 seconds
-Internal calibration: YES
-Display type: Reverse backlit LCD
-Interface: RS232
-External dimension: 198(W) x 294 (D) x 315 (H) mm
-Net weight: Approx. 3.9kg
-Power Supply: AC adapter

- Compact Super Hybrid Sensor (C-SHS) technology - enables you to perform high-speed, frustration-free weighing even at a readability of 0.1 mg.
- Built-in calibration mass - lets you ensure the accuracy of your balance with just one key press.
- Compact footprint: 198 mm × 294 mm - With the C-SHS, the footprint of the balance is smaller than the ISO A4 (210 mm × 297 mm) paper size, maximizing opportunities for the use of an analytical balance in even the smallest of spaces.
- Rotary sliding doors - Unlike conventional analytical balances, the HR-AZ/HR-A series requires no extra space at the rear for accessing the weighing chamber, as the doors simply rotate behind the balance.
- Removable breeze break - The breeze break is easily removed using a unique clip system, allowing fast, simple cleaning and use in confined spaces like gloveboxes and controlled environment cabinets.
- Lean design for affordability - The HR-AZ/HR-A design is all about “keeping it simple” without compromising quality or performance. This is a compact, precise, and reliable analytical balance for the value-conscious user.
- GLP/GMP/GCP/ISO compliant output - For compliance and documentation requirements, the HR-AZ/HR-A series can output the balance manufacturer, model, serial number, ID number, date and time*1, space for signature, and calibration records.
- User access control (UAC) with password function - The balance can be password-protected to allow only authorized individuals to use it or change its settings. It is also possible to disable any change to the balance settings including calibration or, for HR-AZ models, correction of the internal mass value.
- Adjustable response characteristics and hold function - From three preset combinations of weighing speed and stability (FAST, MID, or SLOW), select the one that best suits your environmental conditions (drafts and vibrations). A hold function is also available for weighing animals.
- Statistical calculation function - The balance displays and outputs statistical calculation data including number of data, sum, maximum, minimum, range (maximum–minimum), average, standard deviation, and coefficient of variation.