Automatic Titration

K434-0175: pH Temperature Compensation Card

K380-048: Turntable for 12 samples

K550-6564S: Tube Nozzle A-2 (Sample inlet/outlet) 2pcs/set

K660-048: Titrant temperature compensation sensor

K12-03966 (K100-T111): Temperature compensation electrode(standard)

K120012700 (K100-T171): Temperature compensation electrode

K100-T111L:Temperature Compensation Electrode (cable 200mm)

SCU-118; For automatic titrators (AT-500 through AT-710 series) working with:
-Highly volatile samples
-Oxygen sensitive and cannot be exposed to the atmosphere
-Nitrogen purging is possible inside of the assembly

K020-0029:Sample drain unit 2

K434-6655: K434-6655; Sample Inlet for Handheld Density Meter DA-110

K660000901: Sample Changer Disposable 200mL Cups (1000 pcs/set)

SA 210IW Analytical Balance

CBM-910II-40RF120 Palm-Sized Dot-Impact Printer

KCHG-310-12: KEM Sample Changer, 12 Samples

K12-001-6500-48:Electrode Holder (multi for CHA600 Sample Changer)

K1204267: This automatic shower is an additional accessory that can be used to improve the traditional dip rinse used to clean the electrode between samples. This shower is for aqueous samples only. There is an additional shower configuration for non-aqueous samples.

Electrode Auto-Cleaning Bath Assy. for 6-place unit
consists of:
1 ea Cleaning Bath with tubing and clamp
1 ea Pump Unit
1 ea Cleaning Solution Tube
1 ea TPO tube + PTFE tube 1.5m
1 ea Overflow tube
1 ea 12-04408 10L Polyethylene Container
4 ea Hose Clamp
1 ea Clip

K120426701; This automatic shower is an additional accessory that can be used to improve the traditional dip rinse used to clean the electrode between samples. This shower is for aqueous samples only. There is an additional shower configuration for non-aqueous samples.

Electrode Auto-Cleaning Bath Assy. for 11-place unit
consists of:
1 ea Cleaning Bath with tubing and clamp
1 ea Pump Unit
1 ea Cleaning Solution Tube
1 ea TPO tube + PTFE tube 1.5m
1 ea Overflow tube
1 ea 12-04408 10L Polyethylene Container
4 ea Hose Clamp
1 ea Clip

K12-00192-00 (K12-001-9200-48/K439-5189):CTPT20 tube(black)L=450; Cock-Nozzle (sample dispense); Tube (Black) 2x3 FEP

KEM AT­-710B Automatic Potentiometric Titrator with Standard Preamp.

Specifications
­Type: Automatic Potentiometric Titrator

­Model: AT­710B

­Product configuration: AT­710 w/standard preamp, w/Magnetic stirrer
(combined pH electrode and temperature compensation electrode included)

­Detection range:
1) Potentiometric : ­2000mV to +2000mV
2) pH : ­20.000 to 20.00pH
3) Temperature : 0 to 100°C

­Titration mode: Auto Titration, Auto Intermit, Intermit, Stat
­Method: Standard method 20. (Max 2 methods can be linked)

­Kinds of titration: Potentiometric (acid/base, redox, precipitation), Photometric,
Polarization, Conductivity

­Titration form: Full titration (Auto EP detection), EP Stop, Level Stop

­Special application: Measurement of electrode potential (pH, potential), Acid
dissociation constant (pKa)

­Key operation: Sheet Key on the main unit

­Displays:
1) White LED­backlit LCD
2) English / Japanese / Mandarin Chinese /Korean / Russian / Spanish
3) 1­channel display

­Calculation: Concentration of content, statistics data processing (mean, SD
and RSD) and automatic averaging of blank and factor value

­Data Storage: 50 samples

­GLP conformance: Registration of operator / Record of check results / Record
of electrode calibration / Verification of burette capacity / Management of
conduction time

­Burette size: 20mL glass burette with brown cover (Standard) Optional burette
units: 10mL, 5mL, or 1mL

­Burette accuracy:
50mL burette(Auto dispenser) ± 0.5mL,
20mL burette ± 0.02mL reproducibility ± 0.01mL
10mL burette ± 0.015mL reproducibility ± 0.005mL
5mL burette ± 0.01mL reproducibility ± 0.003mL
1mL burette ± 0.005mL ; reproducibility ± 0.001mL

­External I/O:
RS­232 port x 2: for Dot matrix printer, Electronic balance, Data Capture
Software (SOFT­CAP)
SS­BUS × 1: for Multiple sample changer, APB
ELE. × 1: for Smart electrode
TEMP.COMP. × 1: an Input terminal for the temperature sensor to correct reagent
volume, sensor Pt100, temperature reading accuracy: ±0.5°C (burette 1 only)
USB × 1: for USB flash drive, Thermal printer, Keyboard, Barcode reader, Foot
switch, USB HUB, Android device

­Extensibility:
Automatic piston burette: Can control max 10 burette drives (Including two
built­in burette drives)
Multiple sample changer: CHA­700 series

­Ambient condition:

1) Temperature: 5 to 35°C
2) Humidity: 85%RH or below (no condensation)

­Power source: AC100 ­ 240V ±10% 50/60 Hz
­Power consumption: 20W

­Dimensions:
Titration unit: 141(W) × 296(D) × 367(H)mm
Printer: 106(W) × 180(D) × 88(H) mm

­Weight:
Titration unit: Approx. 4.0kg
Printer : Approx. 0.4kg

­Conformity standard: CE marking EMC: EN61326­1 LVD: EN61010­1 RE
Directive Burette unit EBU FCC Part15 SubpartC FCC ID : 2ABSVEBU01