MKV-710B Volumetric Karl Fisher Titrator

Specifications:
-Type: Volumetric Karl Fischer Moisture Titrator

-Model: MKV-710B

-Product configuration: MKV-710+ Manual Solvent Change Unit.

-Measuring method: Karl Fischer Volumetric Titration

-Measuring range:
1. Water content: 0.1 to 500mgH2O (depends on KF reagent factor)
2. 10ppm to 100%H2O

-Burette precision: Volume: 10mL burette, Discharge precision: ±0.015mL repeatability, Repeatability: ±0.005mL

-Endpoint detection: By polarized potential level detected with a twin platinum electrode

-Titration form: Normal titration / Back titration (Option additional burette required)

-Required solvent: 30 to100mL (in S-type titration vessel)

-Methods: 20

-Key Operation: Sheet key on main unit

-Display:
1. White LED-backlit LCD
2. English / Japanese / Mandarin Chinese / Korean / Russian / Spanish
3. 1-channel display

-Calculation: Concentration of water content, statistics data processing (mean, SD and RSD) and automatic averaging of blank value and factor value

-Data storage: 100 samples

-GLP conformance: 􏰄registration of operator / 􏰅Record of check results/ Record of factor measurement / Management of conduction time

-External I/O:
1. RS232C port × 2 (for Dot matrix printer, Electronic balance, Data Capture Software (SOFT-CAP)
2. USB x 1 (for USB flash drive, thermal printer, Keyboard, Barcode reader, Foot switch, USB HUB, Android device)
3. SS-BUS x 1 (for APB)

-Extensibility
1. Automatic piston burette: Can control max 2 burette drives (including two built-in burette drives)

-Ambient Condition:
1. Temperature; 5 to 35°C
2. Humidity; 85%RH or below (no condensation)

-Power Source: AC100 - 240 ±10% 50/60 Hz

-Power Consumption: Main unit; Approx. 20W, Printer; Approx. 7W

-Dimensions:
1. Titration Unit; 141(W) × 292(D) × 367(H) mm (, not incl. tubing)
2. Stirrer; 107(W) × 206(D) × 322(H) mm (not incl. Solvent Change unit)
3. Solvent Change Unit; 240(W) × 140(D) × 400(H) mm (not incl. tubing)
4. Printer; 106(W)× 180(D) × 88(H) mm

-Weight:
1. Titration Unit = 4.0kg,
2. Stirrer = 2.0kg,
3. Solvent Change Unit = 0.6kg,
4. Printer = 0.4kg

-Conformity Standard: CE marking EMC : EN61326-1 LVD: EN61010-1 RE Directive Burette unit EBU FCC Part15 SubpartC FCC ID: 2ABSVEBU01

K12-03755-01 (K103-M714): Twin platinum electrode. Volumetric Karl Fischer Detector Electrode

K1203755 (K103-M713): Twin platinum electrode - Coulometric Karl Fischer Detector Electrode

120139410 (K523-3161S):Septum 12/2 (10pcs/set) for KEM Karl Fischer Titrators
SEPTA; 12MM OUTER DIAMETER * 2MM HEIGHT

K1204875 (K433-0069): Rubber globe for Drain and fill of volumetric karl fischer vessel

K550-0073: Port plug 19/25 for Coulometric Karl Fischer Titration Cell (KEM)

K740-3002: Volumetric Karl Fischer N-type titration vessel; Capacity 50 to 130mL

K120069610 (K433-0117): Micro sampling unit; Powder Sampling for Coulometric Karl Fischer Titrators

K433-0131: Manual absorb and drain unit for Karl Fischer

K12-001-8600-48 (K433-0050): Magnetic stirrer for Karl Fischer Titrator MKC510N/ MKC520

Vessel for Aquapal

K12-04232-01 (K591-0006): KF Grease (50 grams)

A solvent for Volumetric Karl Fischer titrators. This solvent is designed to work with Hydranal Composites (specifically Composite 5K or Keto Solver) This solvent contains chloroethanol and chloroform. For the determination of water in aldehydes and ketones.

A solvent for Volumetric Karl Fischer titrators. This solvent is designed to work with Hydranal Composites (specifically Composite 5K or Keto Solver) This solvent contains chloroethanol and chloroform. For the determination of water in aldehydes and ketones.

A water standard for Coulometric Karl Fischer titratiors. "Water standard oil" is a low level water standard. Prepared by LOT, the water content will vary by LOT never to exceed 35ppm. Each LOT will come with a certificate with test results. Current LOTs are being measured at 6.0ppm.

A water standard for Coulometric Karl Fischer titratiors (1,000PPM). A certified standard containing 1.00mg of H2O per g (1g = 1.0ml). A manufacturer's test certificate with exact specifications is included. 40ml is packaged as 10x4ml ampules. Case of 6x40mL.

A water standard for Coulometric Karl Fischer titratiors (1,000PPM). A certified standard containing 1.00mg of H2O per g (1g = 1.0ml). A manufacturer's test certificate with exact specifications is included. 40ml is packaged as 10x4ml ampules.

CC34847-6x40mL (CASE of 6 Boxes); A water standard for Coulometric Karl Fischer titratiors (100PPM). A certified standard containing 0.1mg of H2O per g (1g = 1.16ml). This standard contains xylene. The specific gravity of this water standard is approx. 0.86. A manufacturer's test certificate with exact specifications is included. 40ml is packaged as 10x4ml ampules.

CC34847-40ml: A water standard for Coulometric Karl Fischer titratiors (100PPM). A certified standard containing 0.1mg of H2O per g (1g = 1.16ml). This standard contains xylene. The specific gravity of this water standard is approx. 0.86. A manufacturer's test certificate with exact specifications is included. 40ml is packaged as 10x4ml ampules.