8-inch Diameter Stainless Steel Half-Height (1" Deep) Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 1.70mm or No.12
NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

A&D HR-250A Analytical Balance:
-Capacity: 252g
-Readability: 0.1mg
-Minimum weight: 140mg
-Linearity: +-0.3mg
-Stabilization time: Approx. 2 seconds
-Internal calibration: No
-Display type: Reverse backlit LCD
-Interface: RS232
-External dimension: 198(W) x 294 (D) x 315 (H) mm
-Net weight: Approx. 3.5kg
-Power Supply: AC adapter

- Compact Super Hybrid Sensor (C-SHS) technology - enables you to perform high-speed, frustration-free weighing even at a readability of 0.1 mg.
- Built-in calibration mass - lets you ensure the accuracy of your balance with just one key press.
- Compact footprint: 198 mm × 294 mm - With the C-SHS, the footprint of the balance is smaller than the ISO A4 (210 mm × 297 mm) paper size, maximizing opportunities for the use of an analytical balance in even the smallest of spaces.
- Rotary sliding doors - Unlike conventional analytical balances, the HR-AZ/HR-A series requires no extra space at the rear for accessing the weighing chamber, as the doors simply rotate behind the balance.
- Removable breeze break - The breeze break is easily removed using a unique clip system, allowing fast, simple cleaning and use in confined spaces like gloveboxes and controlled environment cabinets.
- Lean design for affordability - The HR-AZ/HR-A design is all about “keeping it simple” without compromising quality or performance. This is a compact, precise, and reliable analytical balance for the value-conscious user.
- GLP/GMP/GCP/ISO compliant output - For compliance and documentation requirements, the HR-AZ/HR-A series can output the balance manufacturer, model, serial number, ID number, date and time*1, space for signature, and calibration records.
- User access control (UAC) with password function - The balance can be password-protected to allow only authorized individuals to use it or change its settings. It is also possible to disable any change to the balance settings including calibration or, for HR-AZ models, correction of the internal mass value.
- Adjustable response characteristics and hold function - From three preset combinations of weighing speed and stability (FAST, MID, or SLOW), select the one that best suits your environmental conditions (drafts and vibrations). A hold function is also available for weighing animals.
- Statistical calculation function - The balance displays and outputs statistical calculation data including number of data, sum, maximum, minimum, range (maximum–minimum), average, standard deviation, and coefficient of variation.

A&D HR-250A Analytical Balance:
-Capacity: 252g
-Readability: 0.1mg
-Minimum weight: 140mg
-Linearity: +-0.3mg
-Stabilization time: Approx. 2 seconds
-Internal calibration: YES
-Display type: Reverse backlit LCD
-Interface: RS232
-External dimension: 198(W) x 294 (D) x 315 (H) mm
-Net weight: Approx. 3.9kg
-Power Supply: AC adapter

- Compact Super Hybrid Sensor (C-SHS) technology - enables you to perform high-speed, frustration-free weighing even at a readability of 0.1 mg.
- Built-in calibration mass - lets you ensure the accuracy of your balance with just one key press.
- Compact footprint: 198 mm × 294 mm - With the C-SHS, the footprint of the balance is smaller than the ISO A4 (210 mm × 297 mm) paper size, maximizing opportunities for the use of an analytical balance in even the smallest of spaces.
- Rotary sliding doors - Unlike conventional analytical balances, the HR-AZ/HR-A series requires no extra space at the rear for accessing the weighing chamber, as the doors simply rotate behind the balance.
- Removable breeze break - The breeze break is easily removed using a unique clip system, allowing fast, simple cleaning and use in confined spaces like gloveboxes and controlled environment cabinets.
- Lean design for affordability - The HR-AZ/HR-A design is all about “keeping it simple” without compromising quality or performance. This is a compact, precise, and reliable analytical balance for the value-conscious user.
- GLP/GMP/GCP/ISO compliant output - For compliance and documentation requirements, the HR-AZ/HR-A series can output the balance manufacturer, model, serial number, ID number, date and time*1, space for signature, and calibration records.
- User access control (UAC) with password function - The balance can be password-protected to allow only authorized individuals to use it or change its settings. It is also possible to disable any change to the balance settings including calibration or, for HR-AZ models, correction of the internal mass value.
- Adjustable response characteristics and hold function - From three preset combinations of weighing speed and stability (FAST, MID, or SLOW), select the one that best suits your environmental conditions (drafts and vibrations). A hold function is also available for weighing animals.
- Statistical calculation function - The balance displays and outputs statistical calculation data including number of data, sum, maximum, minimum, range (maximum–minimum), average, standard deviation, and coefficient of variation.

8-inch Diameter Half-Height (1" Deep) Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 45 microns or No.325

8-inch Diameter Stainless Steel Half-Height (1" Deep) Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 212 microns or No.70

8-inch Diameter Half-Height Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 106 microns or No.140

NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

(No temperature control)

INCLUDES:
• Holder for disposable hook
• Touch screen stylus
• User manual
• Calibration and checking certificate
• Microfiber cloth

FEATURES:
- Torque range: 0.05 to 30mNm. Speed range: 0.3 to 1500 rpm.
- 7'' touch screen for large view of settings and results.
- Direct viewing of curve with gel time analysis.
- Bayonet coupling for quick connection of spindle.
- USB port for data transfer or printer.
- Port for external temperature probe.

8-inch Diameter Half-Height Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 53 microns or No.270

NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

8-inch Diameter Half-Height Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 63 microns or No.230

NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

8-inch Diameter Half-Height Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 75 microns or No.200
NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

8-inch Diameter Half-Height Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 90 microns or No.170
NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

8-inch Diameter Half-Height Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 125 microns or No.120

NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

8-inch Diameter Half-Height Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 150 microns or No.100

NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

8-inch Diameter Half-Height Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 500 microns or No.35
NOTE: For orders that total less than $300, there will be a Minimum-Order Fee of $60.

8-inch Diameter Stainless Steel Half-Height (1" Deep) Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 250 microns or No.60

Disposable Aluminum Cups for use with GT300 Gel Timer. Pack of 100 cups.
Country of origin: U.S.A.

8-inch Diameter Stainless Steel Half-Height (1" Deep) Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 850 microns or No.20

8-inch Diameter Stainless Steel Frame, Stainless Steel Woven Wire Mesh, Certified Compliance with ASTM E11, 100 microns

8-inch Diameter Stainless Steel Half-Height (1" Deep) Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 38 microns or No.400

8-inch Diameter Stainless Steel Half-Height (1" Deep) Frame, Stainless Steel Woven Wire Mesh, Certified Compliance to ASTM E11 Specifications, 180 microns or No.80