K710-0038: Finger shaped sampler

K101-K221:Feed-through-type Standard cell(w/Temp. compensation)

ADP-512 High Heat Evaporator for Ores for Karl Fischer

[Features]
1) Measurement for micro amount of water is least affected from ambient moisture because the movement of
sample boat is controlled by magnet, operated outside the sealed heating unit, and thus accurate and reliable
results are assured.
2) The newly designed electric furnace operates in a wide range of degrees from room temperature up to 1000°C,
featuring relatively short warm-up time, taking approximately 30 minutes for temperature rise as well as for
equilibrium respectively.
3) PID control by the built-in thermostat provides an accurate and stable oven temperature.
4) The safety while working on the electric oven is secured because the maximum temperature over the oven
surface is always kept under 70°C.
5) The built-in excessive heat prevention unit is another safety measures with a thermometer in it, which is
separate from the sensor for temperature control.
6) This evaporator is equipped with two types of electric furnace (for low temperature and for high temperature),
which enables measurement for hygroscopic water as well as combined water without taking the sample out
of the oven.

ADP-611 Evaporator

The ADP-611 is an evaporator/oven to be used and connected with a KF moisture titrator for moisture testing of solid samples, powder samples or samples that may interfere by side reaction if titrated by direct injection method.

SPECIFICATIONS:
-Type and model; Model ADP-611 Evaporator
-Heating method; Electrically conductive clear heater glass
-Temperature range; Control method: proportional
Setting range: 50 ~ 300°C Minimum temperature setting: 1°C
Temperature precision: ± 2°C
Temperature sensor: K-thermocouple
-Temperature display: LED digital 3 characters
-Heater unit : Pyrex glass tube φ 30 × 335mm
-Sample boat: Pyrex glass 68 L × 25 W × 15 H mm , Capacity 16mL
-Carrier gas: Nitrogen: not included in supplied parts./ Nitrogen gas, regulator, and tubing have to be prepared by user
-Gas dryer: Zeolite 100g 2 pcs
-Gas flow: 100 ~ 300 mL/min
-Dimension: 370 (W) × 195 (D) × 217 (H) mm
-Power: AC100 ~ 120V± 10% 50Hz/60Hz / AC220 ~ 240V± 10% 50Hz/60Hz (Pre-adjusted before shipment from the factory)
-Power Consumption: Approx. 300W
Weight: Approx. 5kg

K12-001-6500-48:Electrode Holder (multi for CHA600 Sample Changer)

K1204267: This automatic shower is an additional accessory that can be used to improve the traditional dip rinse used to clean the electrode between samples. This shower is for aqueous samples only. There is an additional shower configuration for non-aqueous samples.

Electrode Auto-Cleaning Bath Assy. for 6-place unit
consists of:
1 ea Cleaning Bath with tubing and clamp
1 ea Pump Unit
1 ea Cleaning Solution Tube
1 ea TPO tube + PTFE tube 1.5m
1 ea Overflow tube
1 ea 12-04408 10L Polyethylene Container
4 ea Hose Clamp
1 ea Clip

K120426701; This automatic shower is an additional accessory that can be used to improve the traditional dip rinse used to clean the electrode between samples. This shower is for aqueous samples only. There is an additional shower configuration for non-aqueous samples.

Electrode Auto-Cleaning Bath Assy. for 11-place unit
consists of:
1 ea Cleaning Bath with tubing and clamp
1 ea Pump Unit
1 ea Cleaning Solution Tube
1 ea TPO tube + PTFE tube 1.5m
1 ea Overflow tube
1 ea 12-04408 10L Polyethylene Container
4 ea Hose Clamp
1 ea Clip

K740-3024: Eggplant-type sampler

K090-148:Disposable cap (1000pcs/set)

Disposable Syringe / 5mL Plastic (Latex free) (syringe only - requires the disposable needle sold separatelty)

Disposable Syringe / 3mL Plastic (Latex free) (syringe only - requires the disposable needle sold separatelty)

Disposable Needle; 16guage by 4inches long (does not include the disposable syringe Part No. 26102SYP)

ASTM D1250,D1475,D4052,D4806,D5002,D5798,D5931

Quickest measurement in 20 seconds Minimum sample of 1.0 mL
Viscosity correction for high-viscosity samples*1 Touchscreen operation
Comes with Density Standard Liquid Equipped with sampling*2 & dry pump Completely ready for use Customizable display & sound
Easy operation & maintenance-free

-Measurement Range; 0 ~ 3 g/cm3
-Temperature Range; 0 ~ 96°C (32 ~ 204.8°F)
-Accuracy; Density ±1x10-4 g/cm3 (0.0001 g/cm3)/ temperature ±0.05 °C (±0.09 °F)
-Repeatability; SD 5x10-5 g/cm3
-Min sample required; Approx. 1 mL (Syringe) / Approx. 2mL (Pump)
-Measurement time; to 4 mins (Manual) / 2 to 10 mins (Auto)
-Resolution; Density & SG 0.0001/ temperature 0.01
-Viscosity Correction: YES
-Method; Saves up to 100 different methods in built-in memory
-Data I/O; USB flash drive as data storage medium, app notes provided in USB flash drive
-Dimensions; 320 (W) x 365 (D) x 250 (H) mm (12.6 (W) x 14.4 (D) x 9.8 (H) inches)
-Weight; 18 kg (39.7 lbs)

KEM DA-130N Portable Density Meter/Specific Gravity Meter
-MEASURING METHOD: Resonant frequency oscillation
-MEASURING RANGE: 0.0000 to 2.0000g/cm3
-ACCURACY: ±0.001g/cm3
-RESOLUTION: 0.0001g/cm3
-TEMPERATURE RANGE: 0 to 40.0° C (32 to 104° F)
-BACKLIT DISPLAY: Density, temp-compensated density, SG, temp-compensated SG, Brix%, Alcohol wt%, Alcohol vol%, %H2SO4, API degree,
Baume degree, Plato degree, Proof degree, Temperature in ° C/° F, Sample No.,
-TEMPERATURE COMPENSATION: Yes
-AUTO-CALIBRATION: Yes
-SAMPLING BY: Syringe-type hand pump
-DATA STORAGE: Up to 1,100 samples
-POWER SUPPLY: Alkaline battery LR03 (AAA) 1.5V 2pcs
-BATTERY LIFE: Approx. 90 hours
-WEIGHT: Approx.(0.794 lbs)

K560-0109S: Cups for Micro sampling unit

-Measuring Range; Water content / Bromine index: 10ug to 300mg
-Measurement cell; 2-Component or 1-Component
-Precision; Relative standard deviation : less than 0.3% (n=10) *Per KEM standard measurement conditions and standard liquids
-Display resolution; 0.1ug
-Methods; 20
-Data storage; 100 samples
-External I/O; -232C port × 2 (for printer, balance, software), USBx1 (for USB flash drive, printer, keyboard, barcode reader, foot switch, USB hub, Android device)
-Ambient Condition; (1) Temperature: 5 to 35°C (2): 85% H or below (no condensation)
-Power Source; AC100 - 240 ±10% 50/60 Hz
-Dimensions; 141(W ) × 292(D) × 244(H) mm
-Weight; Approx.3.0kg
-GLP Conformance; Registration of operator / Check performance with standard substance / reagent life control / Management of conduction time
-Conformity Standard; CE marking EMC: EN61326-1 L D: EN61010-1

Sample Container Vials + aluminum spheres (100pcs of each/set)

Sample Container Vials + aluminum spheres (100pcs of each/set)

Sample Container Vials + aluminum spheres (100pcs of each/set)

Sample Container Vials + aluminum spheres (100pcs of each/set)