STANDARD. A standard design specifically for use in doing back titrations. Water content is 5.00 plus or minus 0.02 mg per ml.

A solvent for Volumetric Karl Fischer titrators. This solvent is designed to work with Hydranal Composites (specifically Composite 5K or Keto Solver) This solvent contains chloroethanol and chloroform. For the determination of water in aldehydes and ketones.

A solvent for Volumetric Karl Fischer titrators. This solvent is designed to work with Hydranal Composites (specifically Composite 5K or Keto Solver) This solvent contains chloroethanol and chloroform. For the determination of water in aldehydes and ketones.

A water standard for Coulometric Karl Fischer titratiors. "Water standard oil" is a low level water standard. Prepared by LOT, the water content will vary by LOT never to exceed 35ppm. Each LOT will come with a certificate with test results. Current LOTs are being measured at 6.0ppm.

A water standard for Coulometric Karl Fischer titratiors (1,000PPM). A certified standard containing 1.00mg of H2O per g (1g = 1.0ml). A manufacturer's test certificate with exact specifications is included. 40ml is packaged as 10x4ml ampules. Case of 6x40mL.

A water standard for Coulometric Karl Fischer titratiors (1,000PPM). A certified standard containing 1.00mg of H2O per g (1g = 1.0ml). A manufacturer's test certificate with exact specifications is included. 40ml is packaged as 10x4ml ampules.

CC34847-6x40mL (CASE of 6 Boxes); A water standard for Coulometric Karl Fischer titratiors (100PPM). A certified standard containing 0.1mg of H2O per g (1g = 1.16ml). This standard contains xylene. The specific gravity of this water standard is approx. 0.86. A manufacturer's test certificate with exact specifications is included. 40ml is packaged as 10x4ml ampules.

CC34847-40ml: A water standard for Coulometric Karl Fischer titratiors (100PPM). A certified standard containing 0.1mg of H2O per g (1g = 1.16ml). This standard contains xylene. The specific gravity of this water standard is approx. 0.86. A manufacturer's test certificate with exact specifications is included. 40ml is packaged as 10x4ml ampules.

A water standard for Coulometric and Volumetric Karl Fischer titrators (10,000PPM). A certified standard containing 10.0mg of H2O per g (1g = 1.16ml). A manufacturer's test certificate with exact specifications is included. 80ml is packaged as 10x8ml ampules.

A reagent for Volumetric Karl Fischer titrators. This is a two-component volumetric Karl Fischer reagent . One ml of Titrant 5 is equivalent 5.0+-0.02mg H2O. A note about two-component reagents: With two-component reagents the reactants are in separate bottles. The titrant is a solution of iodine and alcohol. The solvent solution contains the sulpher dioxide and imidazole in a specific alcohol. The reagents remain stable and unchanged for a minimum of two years as long as the bottle remains unopened.

A reagent for Volumetric Karl Fischer titrators. This is a two-component volumetric Karl Fischer reagent . One ml of Titrant 2 is equivalent 2.0+-0.01mg H2O. A note about two-component reagents: With two-component reagents the reactants are in separate bottles. The titrant is a solution of iodine and alcohol. The solvent solution contains the sulpher dioxide and imidazole in a specific alcohol. The reagents remain stable and unchanged for a minimum of two years as long as the bottle remains unopened.

CC34697-6x1L (case); Working medium containing xylene and chloroform for water determination of oils.

CC34697-1L; Working medium containing xylene and chloroform for water determination of oils.

A solvent for Volumetric Karl Fischer titrators. This solvent is to be used with the two-component volumetric reagents (Titrant 1, Titrant 2). This is a methanol based solvent for volumetric Karl Fischer applications. A note about two-component reagents: With two-component reagents the reactants are in separate bottles. The titrant is a solution of iodine and alcohol. The solvent solution contains the sulpher dioxide and imidazole in a specific alcohol. The reagents remain stable and unchanged for a minimum of two years as long as the bottle remains unopened.

A solvent for Volumetric Karl Fischer titrators. This solvent is to be used with the two-component volumetric reagents (Titrant 1, Titrant 2). This solvent is for the determination in non-polar substances like fats & oils. Contains methanol and hexane. A note about two-component reagents: With two-component reagents the reactants are in separate bottles. The titrant is a solution of iodine and alcohol. The solvent solution contains the sulpher dioxide and imidazole in a specific alcohol. The reagents remain stable and unchanged for a minimum of two years as long as the bottle remains unopened.

A solvent for Volumetric Karl Fischer titrators. This solvent is to be used with the two-component volumetric reagents (Titrant 1, Titrant 2). This solvent is for the determination in non-polar substances like fats & oils. Contains methanol and hexane. A note about two-component reagents: With two-component reagents the reactants are in separate bottles. The titrant is a solution of iodine and alcohol. The solvent solution contains the sulpher dioxide and imidazole in a specific alcohol. The reagents remain stable and unchanged for a minimum of two years as long as the bottle remains unopened.

A solvent for Volumetric Karl Fischer titrators. This solvent is to be used with the standard one-component Hydranal Composites (Comp5,Comp2,Comp1). This solvent contains methanol and chloroform for the determination of non-polar samples like fats & oils.

A solvent for Volumetric Karl Fischer titrators. This solvent is to be used with the standard one-component Hydranal Composites (Comp5,Comp2,Comp1). This solvent contains methanol and chloroform for the determination of non-polar samples like fats & oils.

CC37866-6x1L; Hydranal grade solvent - Xylene - for karl fisher titrations.